Supermicro E100-9APP User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Server
  5. E100-9APP
  6. User manual
Supermicro E100-9APP User Manual

Supermicro E100-9APP User Manual

Superservers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S
S
®
UpER
ERvER
E100-9App
USER'S MANUAL
Revision 1.0

Advertisement

Table of Contents
loading

Related Manuals for Supermicro E100-9APP

Summary of Contents for Supermicro E100-9APP

  • Page 1 ® UpER ERvER E100-9App USER’S MANUAL Revision 1.0...

  • Page 2: About This Manual

    State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution drivers/utilities and the user’s manual for your server. of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. •...

  • Page 3: Table Of Contents

    Processor ..........................18 Memory Support ........................18 Installing Memory ......................18 Solid State Storage ......................20 Motherboard Battery ......................20 Chapter 3 E100-9APP I/O Introduction 3.1 Front I/O ..........................21 3.2 Rear I/O ..........................23 3.3 Internal Expansion Slots ....................24 3.4 LED Indicators ........................26 Chapter 4 Software 4.1 Driver Installation ........................27...

  • Page 4: Contacting Supermicro

    SuperServer E100-9APP User's Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V.

  • Page 5: Introduction

    Introduction 1.1 Overview The SuperServer E100-9APP is a compact, embedded system comprised of the CSE-E101 chassis and the X11SAN single processor motherboard. Refer to our website for information on operating systems that have been certified for use with the system (www.supermicro.com).

  • Page 6: System Features

    Chapter 1: Introduction 1.2 System Features 1.3 Chassis Features The following table provides an overview of the main features of the E100-9APP. Please refer The CSE-E101 is a compact embedded 3.5" SBC chassis. to Appendix C for additional specifications. Front Features...

  • Page 7: Rear Features

    SuperServer E100-9APP User's Manual Chapter 1: Introduction Rear Features 1.4 Motherboard Layout The chassis rear holds input/output ports, described in chapter 3. Below is a layout of the X11SAN with jumper, connector and LED locations shown. See the table on the following page for descriptions. For detailed descriptions, pinout information and jumper settings, refer to Chapter 4.

  • Page 8: Quick Reference Table

    SuperServer E100-9APP User's Manual Chapter 1: Introduction System Block Diagram Quick Reference Table Jumper Description Default Setting MAX. 8G SO-DIMM SUPPORTED DUAL CHANNEL Intel DDI0 Non-ECC-SODIMM0 JLCDPWR1 LVDS Panel VCC Power 3.3V / 5V / 12V Pins 1-2 (3.3V), Pins 3-5 (5V), Pins 3-4 (12V)

  • Page 9: Server Installation And Setup

    SuperServer E100-9APP User's Manual Chapter 1: Introduction 1.5 Server Installation and Setup Installing Mounting Brackets The chassis includes mounting brackets that allow it to be mounted in any convenient space The server is shipped with the onboard processor and the motherboard installed in the in the work environment.

  • Page 10: Chapter 2 Maintenance And Component Installation

    SuperServer E100-9APP User's Manual Chapter 2: Maintenance and Component Installation Chapter 2 2.2 Accessing the System Maintenance and Component Installation The E101 features a removable bottom cover to access to the inside of the chassis. This chapter provides instructions on installing and replacing main system components. To prevent compatibility issues, only use components that match the specifications and/or part numbers given.

  • Page 11: Motherboard Components

    3. The side clips will automatically secure the SODIMM module, locking it into place. Locking clip Processor The E100-9APP features an embedded Intel® Pentium® N4200 processor. Memory Support The X11SAN series motherboard supports up to 8 GB of DDR3L Non-ECC SODIMM memory with speeds up to 1866 MHz in one memory slot.

  • Page 12: Solid State Storage

    SuperServer E100-9APP User's Manual Solid State Storage This motherboard supports an internally mounted solid state storage card by means of an M.2 slot supporting SATA/PCI-E or WWAN/GNSS. Figure 2-2. Installing an M.2 Expansion Card Installing the M.2 Card 1. Gently insert the M.2 card into the connector.

  • Page 13: Chapter 3 E100-9App I/O Introduction

    Chapter 3 E100-9APP I/O Introduction Chapter 3 E100-9APP I/O Introduction This section describes the E100-9AP I/O connectors and pin definition. Please review the Safety Precautions in Appendix A before installing or removing components. Illustrations showing front and rear I/O layouts and a motherboard layout indicating component locations and I/O port locations may be found in Chapter 1.

  • Page 14: Rear I/O

    SuperServer E100-9APP User's Manual Chapter 3 E100-9APP I/O Introduction 3.2 Rear I/O Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be configured to function as a suspend DC Input Power Connector button (with a setting in the BIOS - see Chapter 4).

  • Page 15: Internal Expansion Slots

    SuperServer E100-9APP User's Manual Chapter 3 E100-9APP I/O Introduction 3.3 Internal Expansion Slots Mini PCI-E Slot The Mini PCI-E slot, located at JMP1 on the bottom side of the motherboard, is used to install a compatible Mini PCI-E device. The Mini PCI-E slot supports modules which are USB or M.2 Slot...

  • Page 16: Led Indicators

    SuperServer E100-9APP User's Manual 3.4 LED Indicators LAN Port LEDs Two LAN ports (LAN 1 and LAN 2) are located on the I/O back panel of the motherboard. Each Ethernet LAN port has two LEDs. The green LED indicates activity, while the other Link LED may be green, amber, or off to indicate the speed of the connection.

  • Page 17: Chapter 4 Software

    This section describes the installation of drivers and management programs for the system. 4.1 Driver Installation The Supermicro FTP site contains drivers and utilities for your system at ftp://ftp.supermicro. com. Some of these must be installed, such as the chipset driver.

  • Page 18: Superdoctor 5

    4.2 SuperDoctor ® The Supermicro SuperDoctor 5 is a program that functions in a command-line or web-based interface for Windows and Linux operating systems. The program monitors such system health information as CPU temperature, system voltages, system power consumption, fan speed, and provides alerts via email or Simple Network Management Protocol (SNMP).

  • Page 19: Starting The Setup Utility

    Chapter 5: BIOS Chapter 5 BIOS 5.1 Introduction This chapter describes the AMI BIOS setup utility for the X11SAN motherboard. It also provides the instructions on how to navigate the AMI BIOS setup utility screens. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. Note: Due to periodic changes to the BIOS, some settings may have been added or deleted and might not yet be recorded in this manual.
  • Page 20 SuperServer E100-9APP User's Manual Chapter 5: BIOS 5.2 Main Page 5.3 Advanced Page When you first enter the AMI BIOS setup utility, you will enter the Main setup screen. You can Use this tab page to set some boot, power, CPU, SATA, server ME, and input/output settings.
  • Page 21 SuperServer E100-9APP User's Manual Chapter 5: BIOS Bootup NumLock State CPU Configuration Use this feature to set the Power-on state for the <Numlock> key. The options are Off and On. The following CPU information will be displayed: Wait For 'F1' If Error •...

  • Page 22: Main

    SuperServer E100-9APP User's Manual Chapter 5: BIOS PPIN Control If the above is set to Enable, CPU P State will display: Select Unlock/Enable to use the Protected-Processor Inventory Number (PPIN) in the system. CPU P State Control The options are Unlock/Enable and Unlock/Disable.
  • Page 23 SuperServer E100-9APP User's Manual Chapter 5: BIOS Package C State Limit Workload Configuration This feature allows the user to set the limit on the C State package register. The options This feature allows for optimization of workload. Balanced is recommended. The options are C0/C1 State, C2 State, C6 (Non Retention) State, C6 (Retention) State, and No Limit.
  • Page 24 SuperServer E100-9APP User's Manual Chapter 5: BIOS IIO1 Configuration Memory Configuration M.2 PCI-E 3.0 X4 Enforce POR This item configures the link speed of the PCI-E port specified by the user. The options Select Enable to enforce POR restrictions on DDR4 frequency and voltage programming.
  • Page 25 SuperServer E100-9APP User's Manual Chapter 5: BIOS Memory RAS (Reliability_Availability_Serviceability) Configuration XHCI Hand-Off This is a work-around solution for operating systems that do not support XHCI (Extensible Use this submenu to configure the following Memory RAS settings. Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the XHCI driver.
  • Page 26 SuperServer E100-9APP User's Manual Chapter 5: BIOS Configure SATA as Port 0 - Port 5 SATA Device Type (Available when a SATA port is detected) Select IDE to configure a SATA drive specified by the user as an IDE drive. Select AHCI to Use this item to specify if the connected SATA device is a Solid State drive or a Hard Disk configure a SATA drive specified by the user as an AHCI drive.

  • Page 27: Super Io Configuration

    SuperServer E100-9APP User's Manual Chapter 5: BIOS Maximum Payload Onboard LAN3 Option ROM Use this feature to select the setting for the PCI Express maximum payload size. The options Use this option to select the type of device installed in LAN Port 3 used for system boot. The are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.

  • Page 28: Serial Port Console Redirection

    SuperServer E100-9APP User's Manual Chapter 5: BIOS Device Settings Parity This item displays the status of a serial part specified by the user. A parity bit can be sent along with regular data bits to detect data transmission errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits is even.
  • Page 29 SuperServer E100-9APP User's Manual Chapter 5: BIOS SOL Console Redirection Send a "Start" signal to start sending data when the receiving buffer is empty. The options are None and Hardware RTS/CTS. Select Enabled to use the SOL port for Console Redirection. The options are Enabled and Disabled.
  • Page 30 SuperServer E100-9APP User's Manual Chapter 5: BIOS Out-of-Band Mgmt Port PCI AER Support The feature selects a serial port in a client server to be used by the Microsoft Windows Use this feature to enable the ACPI OS to manage PCI Advanced Error Reporting. The options Emergency Management Services (EMS) to communicate with a remote host server.
  • Page 31 SuperServer E100-9APP User's Manual Chapter 5: BIOS 5.4 Event Logs Memory Corr. Error Threshold Use this item to enter the threshold value for correctable memory errors. The default setting Use this tab page to manage settings for system event logs.
  • Page 32 SuperServer E100-9APP User's Manual Chapter 5: BIOS 5.5 Security • Secure Boot • Use this tab page to manage security settings. Vendor Keys Secure Boot Use this item to enable secure boot. The options are Disabled and Enabled. Secure Boot Mode Use this item to select the secure boot mode.
  • Page 33 SuperServer E100-9APP User's Manual Chapter 5: BIOS 5.6 Boot Settings Append Key Select Yes to add the database from the manufacturer's defaults to the existing DB. Select Use this tab page to manage boot settings. No to load the DB from a file. The options are Yes and No.

  • Page 34: Save & Exit

    SuperServer E100-9APP User's Manual Chapter 5: BIOS • 5.7 Save & Exit Dual Boot Order #4 • Dual Boot Order #5 Use this tab page to manage your exit from the Setup Utility. • Dual Boot Order #6 • Dual Boot Order #7 •...
  • Page 35 SuperServer E100-9APP User's Manual Discard Changes Select this option and press <Enter> to discard all the changes and return to the AMI BIOS utility Program. Restore Defaults To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.

  • Page 36: Bios Error Codes

    When BIOS performs the Power On Self Test, it writes checkpoint codes to I/O port 0080h. If the computer cannot complete the boot process, a diagnostic card can be attached to the computer to read I/O port 0080h (Supermicro p/n AOC-LPC80-20). For information on AMI updates, please refer to http://www.ami.com/products/.
  • Page 37 Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de Read this appendix in its entirety before installing or configuring components in the Supermicro manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese chassis.
  • Page 38 SuperServer E100-9APP User's Manual Appendix B: Standardized Warning Statements . ٌ ‫ا ك ً ف حالة و ٌ يك أى تتسبب ف اصابة جسذ ة ٌ هذا الزهز ع ٌ خطز !تحذ ز‬ Warnung ‫قبل أى تعول عىل أي هعذات،يك عىل علن بالوخاطز ال ا ٌجوة عي الذوائز‬...
  • Page 39 SuperServer E100-9APP User's Manual Appendix B: Standardized Warning Statements Power Disconnection Warning Warnung Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Warning! The system must be disconnected from all sources of power and the power Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung cord removed from the power supply module(s) before accessing the chassis interior nicht mehr als: 12V, 3.3A beträgt.
  • Page 40 SuperServer E100-9APP User's Manual Appendix B: Standardized Warning Statements ‫يجب فصم اننظاو من جميع مصادر انطاقت وإ ز انت سهك انكهرباء من وحدة امداد‬ Attention ‫انطاقت قبم‬ Il est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à...
  • Page 41 SuperServer E100-9APP User's Manual Appendix B: Standardized Warning Statements Battery Handling Warnung Diese Einheit ist zur Installation in Bereichen mit beschränktem Zutritt vorgesehen. Der Zutritt zu derartigen Bereichen ist nur mit einem Spezialwerkzeug, Schloss und Schlüssel oder einer Warning! There is the danger of explosion if the battery is replaced incorrectly. Replace sonstigen Sicherheitsvorkehrung möglich.
  • Page 42 SuperServer E100-9APP User's Manual Appendix B: Standardized Warning Statements ‫هناك خطر من انفجار يف حالة اسحبذال البطارية بطريقة غري صحيحة فعليل‬ Attention ‫اسحبذال البطارية‬ L'équipement doit être installé conformément aux normes électriques nationales et locales. ‫فقط بنفس النىع أو ما يعادلها مام أوصث به الرشمة املصنعة‬...
  • Page 43 Electrical Appliance and Material Safety Law 製品の廃棄 prohibits the use of UL or CSA -certified cables (that have UL/CSA shown on the この製品を廃棄処分する場合、 国の関係する全ての法律 ・ 条例に従い処理する必要があります。 code) for any other electrical devices than products designated by Supermicro only. 電源コードとACアダプター 警告 製品を設置する場合、 提供または指定および購入された接続ケーブル、 電源コードとACアダプター...
  • Page 44 ‫.قيرح وأ لطع يف ببستي دق ىرخأ تالوحمو تالباك يأ مادختسا .ميلسلا سباقلاو لصوملا مجح‬ ‫ لبق نم ةدمتعملا تالباكلا مادختسا تادعملاو ةيئابرهكلا ةزهجألل ةمالسلا نوناق رظحي‬UL ‫ وأ‬CSA ‫( ةمالع لمحت يتلاو‬UL/CSA) ‫ لبق نم ةددحملاو ةينعملا تاجتنملا ريغ ىرخأ تادعم يأ عم‬Supermicro.
  • Page 45 SuperServer E100-9APP User's Manual Appendix C: System Specifications Appendix C Regulatory Compliance Electromagnetic Emissions: FCC Class B, EN 55032/55022 Class B, EN 61000-3-2/3-3, CISPR 32/22 Class B System Specifications Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,...
  • Page 46 SuperServer E100-9APP User's Manual Appendix C: System Specifications Traditional Chinese Version Safety Warnings Traditional Chinese Version 1. 勿使用多孔插座或延長線，否則可能造成溫度過高而引起火災。 Safety Warnings 2. 勿在電源線放置重物，否則可能引起火災或受到電擊。 3. 勿踏在電源線上，及勿損傷或任意處理電源線， 否則可能引起火災或 受到電擊。 4. 勿綁住或紮緊電源線，否則可能引起火災或受到電擊。 Additional Traditional Chinese Version warning statements are included here in this appendix.
  • Page 47 Table 2-1. Declaration of the Presence Condition of the Restricted Substances Marking ( 限用物質含有情況標示聲明書 Declaration of the Presence Condition of the Restricted Substances Marking 型號（型式）：適用於 E100-9APP及其所有系列機種 Type designation 設備名稱：伺服器， Equipment name: Server (Type): E100-9APP and all its series models 限用物質及其化學符號 Restricted Substances and its Chemical Symbols 多溴二苯醚 六價鉻 多溴聯苯 單元...
  • Page 48 Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS update.
  • Page 49 SuperServer E100-9APP User's Manual Appendix D: UEFI BIOS Recovery The file system supported by UEFI is FAT (including FAT12, FAT16, and FAT32) which is 3. While powering on the system, please keep pressing <Ctrl> and <Home> simultaneously installed on a bootable or non-bootable USB-attached device. However, the BIOS might need on your keyboard until the following screen (or a screen similar to the one below) displays.
  • Page 50 SuperServer E100-9APP User's Manual Appendix D: UEFI BIOS Recovery 7. Using a different system, extract the BIOS package into a USB flash drive. 5. When the screen as shown above displays, use the arrow keys to select the item 8. Press <Del> continuously during system boot to enter the BIOS setup utility. From the top of the tool bar, click on Boot and press <Enter>...

This manual is also suitable for:

Superserver e100-9ap

Table of Contents