Supermicro SuperServer E403-9D-16C-IP User Manual page 28

SuperServer E403-9D-16C-IP User's Manual
Accessing the Server
1. Power down the system as described in Section 3.1.
2. Remove one screw on top of the system cover near the I/O panel (see figure below).
3. Remove two screws on the fan cover if necessary.
4. Flip open the fan cover.
5. Remove the screw that has been exposed (see figure below).
6. Slightly slide the server cover towards the fans.
7. Lift both segments of the top cover off the chassis.
2
5
Figure 3-2. Open Fan Cover to Access Fans, Filters, and Screw
28