Table of Contents
Advertisement
System Precautions
•
Keep a one-foot (30 cm) clearance from the ground to provide sufficient airflow for cabinet
cooling.
•
Only install the system on a pole with a diameter of between 5" and 10".
•
Ensure that the pole is capable to withstand the weight of the system before installation.
•
Various pole types and materials are regulated in different regions, please refer to local
regulations before mounting the system on a pole.
•
Keep a 4ft (122cm) clearance around the pole to provide operating space.
•
Use only the designed components and fasteners; using alternative components will invoke
unpredictable risk.
•
When not servicing, always keep all covers/panels/door on the server closed. These must
be in place to allow for proper airflow and to prevent overheating.
•
Review the electrical and general safety precautions in Appendix B.
•
If surface paint becomes scratched or chipped off, touch it up with outdoor-use paint
Chapter 2: System Installation
21
Advertisement
Table of Contents
