The Hp Summary Screen And Setup Program - HP Kayak XU04 User Manual
Pc workstations
Hide thumbs
Also See for Kayak XU04:
- Supplementary manual (74 pages) ,
- Installation and configuration manual (30 pages) ,
- Features manual (28 pages)
Table of Contents
Advertisement
The HP Summary Screen and Setup Program
You can use the Summary Screen and the Setup program to configure
your PC Workstation and solve configuration problems with your PC
Workstation.
Starting the HP Setup Program
1 Turn on the display and then the PC Workstation. If the PC
Workstation is already turned on, save your data and exit all
programs, then restart the PC Workstation. Consult your operating
system documentation for any special instructions concerning
turning off and then restarting your PC Workstation.
2 Press
while
If you fail to press
you will need to restart your PC Workstation to go through the POST
again so you can press
The opening screen of the PC Workstation's Setup program is
displayed.
Viewing the HP Summary Screen
Check your PC Workstation's configuration each time after you install,
remove, or upgrade accessories. To check the configuration:
1 Turn on the display and then the PC Workstation. If the PC
Workstation is already turned on, save your data and exit all
programs, then restart the PC Workstation. Consult your operating
system documentation for any special instructions concerning
turning off and then restarting your PC Workstation.
2 While the start-up logo appears on your display, press
takes you to the HP Summary Screen. (To go immediately into the
Setup program, and bypass the Summary Screen, press
of
). The Summary Screen is displayed for only a short time. To
retain the screen (until you decide to leave it), press
3 Troubleshooting Your HP PC Workstation
The HP Summary Screen and Setup Program
is displayed at the bottom of the screen.
Setup
in time and the start-up process continues,
.
. This
instead
.
English
39
Advertisement
Table of Contents
