WARNING
NOTE
Installation Tools
1 Setting Up and Using Your HP PC Workstation
Unpacking Your Kayak PC Workstation
Unpacking Your Kayak PC Workstation
If you are in any doubt that you can lift the PC Workstation and the
display safely, do not try to move them without help.
1 When you receive your PC Workstation, unpack all of the
components.
Device drivers, HP utilities, and an online Using Sound guide are
preloaded on your system and provided on an HP CD-ROM. This CD-
ROM also includes tips for re-installing the operating system.
2 Place the PC Workstation on a sturdy desk with easily accessible
power outlets and enough space for the keyboard, mouse, and any
other accessories.
3 Position the PC Workstation so that its rear connectors are easily
accessible.
No tools are required to install your PC Workstation. However, if you
plan to install a disk drive or an accessory board inside your
PC Workstation, you will need a flat-blade screwdriver. For more
information on installing accessories, refer to "How to Install
Accessories In Your HP PC Workstation", on page 19.
2
English