POST Phase
Following these checks, the POST (Power-On Self Test) sequence is
initiated. One of the following screens will appear in this phase:
HP KAYAK XU
No errors occurred.
Other Features
HP MaxiLife can also be configured to:
Display the configuration details of your PC Workstation required to
•
obtain support (System info.)
Indicate POST (Power-On Self Test) steps during the power-on
•
phase (Boot steps)
Perform diagnostic tests on your PC Workstation's various hardware
•
components and display the results (Diags).
To configure your HP LCD:
1 Ensure that your PC Workstation's power cord is connected to a
grounded outlet.
In this state, your PC Workstation's hardware management chip is
active, even if your system is not powered on.
2 Press one of the LCD control buttons. The following menu is
displayed.
System info
Boot steps
Next
3 Use
to scroll down through the menu items and
required menu item.
3 Troubleshooting Your HP PC Workstation
Error!
POST XXXX
A POST error occurred. Refer to the
Upgrade and Configuration Guide
for more information.
Go
Using HP MaxiLife to Diagnose Problems
Diags
Exit
Next
Go
to select the
English
29
Need help?
Do you have a question about the Kayak XU04 and is the answer not in the manual?