HP Kayak XU04 User Manual page 30

2 How to Install Accessories In Your HP PC Workstation
Removing and Replacing the Cover
Replacing the Cover
1 Ensure that you have installed all your accessories and that all
internal cables are properly connected and safely routed.
2 Ensure that the two latches on the front sides of the cover are lifted
up, and that the lock is unlocked.
3 Slide the cover onto the computer, making sure that the two guides
at the bottom of the case slide into the two rails on the base of the
computer. Firmly slide the cover backwards into position.
4 Lower the latches on the front sides of the cover.
5 If required, lock the cover using the key provided.
6 Reconnect all the power and telecommunications cables.
22 English