Table of Contents
Advertisement
3
THE HP SETUP PROGRAM
This chapter describes how to use the HP Setup program.
THE HP SUMMARY SCREEN AND SETUP PROGRAM
HP SUMMARY SCREEN
Check your PC's configuration when you first use the PC and each time after you install,
remove, or upgrade accessories. To check the configuration:
1
Turn on the display and then the PC. If the PC is already turned on, save your data and
exit all programs, then press [CTRL] [ALT] and [DEL] to restart the PC (Windows 3.11).
For Windows 95, use the Shut Down command.
2
While the Vectra logo appears on your display, press [ESC]. This will take you to the HP
Summary Screen. (To go immediately into the Setup program, and bypass the Summary
Screen, press [F2] instead of [ESC]). The Summary Screen will appear for only a short
time. To retain the screen indefinitely (until you decide to leave it), press [F5].
When the Vectra logo
appears, Press [ESC] to
go to the Summary Screen
Advertisement
Table of Contents
