Download Print this page

Removing And Replacing The Cover - HP Kayak XU04 User Manual

Pc workstations
Hide thumbs


Table of Contents

Removing and Replacing the Cover

For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.
Removing the Cover
1 Switch off the display and computer.
2 Disconnect all power cables and any LAN or telecommunications
3 If necessary, unlock the cover using the key on the back panel.
4 Lift the two latches on the front sides of the computer upwards.
5 Grasp the cover on the sides at the back of the computer and slide it
forwards and off the computer.
2 How to Install Accessories In Your HP PC Workstation
Removing and Replacing the Cover


Table of Contents

  Also See for HP Kayak XU04

  Related Manuals for HP Kayak XU04

This manual is also suitable for:

Kayak xu 04xxKayak xw04Kayak xu seriesKayak xw series