7.7
Removal of the Front Panel Assembly
1. Remove the Phillips-head screw from the bottom of the front panel assembly.
Refer to Figure 51.
Front
Panel
Assembly
Screw
2. Lift the assembly upward and pull forward while feeding cables through from the
inside. Note the routing of the cable. Refer to Figure 52.
3. To reinstall, feed the power switch / audio and USB assembly cables through the
chassis where the prior cables were removed.
4. Reattach with the screw that was removed in step 1.
5. Reconnect the cables.
92
Figure 50. Chassis Front With Bezel Removed
Figure 51. Front Panel Assembly
hp workstation i2000 owner's guide