3.14
Using the EFI Shell and Boot Manager
1. Turn the power on, or restart the system.
2. Choose Boot OS from the Splash Screen or wait without making a choice (the
BIOS will boot the EFI Shell if you do not choose Enter Setup).
3. If only the User Password is set, you must enter the User Password. If both the
User and Administrator Passwords are set, you can enter either password.
4. The system boot manager will display similar to what is shown in Figure 23
5. Selecting the EFI shell option displays the device-mapping table and launches the
EFI command mode as shown in Figure 24.
60
Figure 23. EFI Boot Manager Prompt
hp workstation i2000 owner's guide