Figure 40. Power Supply Door In Opened Position - HP i2000 Owner's Manual

Peripheral
Power
Harness
Baseboard
E-PAC

Figure 40. Power Supply Door in Opened Position

7. Open the power supply door (as shown in Figure 41) by pulling upwards and
allowing the door to swing outwards until the metal clip (near the top of the
system) is engaged with a "click". The power supply door is now locked into an
open position for system access.
8. Remove the baseboard E-PAC (black Styrofoam protective material as shown in
Figure 41).
84
hp workstation i2000 owner's guide
Baseboard
Power
Harness
Processor
E-PAC