Installing The Adapter Cards; Installing The Upgrade Ram Accessories; Preparing The Memory Boards; Figure 56. Dimms And Dc-Dc Converters - HP i2000 Owner's Manual

8.5

Installing the Adapter Cards

Locate and reinstall all remaining PCI or AGP based adapter cards previously removed
from the system.
/
NOTE
The WXB PCI buses (S2 and slots 1, 2, 3, and 4) support 3.3 V cards, while the
PXB PCI bus (slots 5 and 6) support 5 V cards. Both WXB and PXB PCI buses
support universal cards. Please make certain that the PCI slot used is
compatible with the PCI card inserted in that slot.
8.6

Installing the Upgrade RAM Accessories

8.6.1

Preparing the Memory Boards

Check that the DIMM sites are correctly populated and that the DC-DC converters are
installed on the memory boards. Refer to Figure 56.

Figure 56. DIMMS and DC-DC Converters

hp workstation i2000 owner's guide
101