Add A Boot Option; Figure 27. Add Boot Option - HP i2000 Owner's Manual

3.15.2 Add A Boot Option

Selecting Add a Boot Option on the main menu allows new Boot Option information to
be added to the EFI Shell. Use the following steps to add a Boot Option.
1. Select the device where the boot file is located (refer to Figure 28).
2. Select the file within the device.
3. Enter the file description at the prompt (refer to Figure 29).
4. Type 'u' or 'U' to select Unicode and press Enter.
5. Save the changes once the new information has been added.
64

Figure 27. Add Boot Option

hp workstation i2000 owner's guide