Set Auto Boot Timeout; Figure 32. Auto Boot Time Delay - HP i2000 Owner's Manual

3.15.6 Set Auto Boot Timeout

The Auto Boot Timeout selection on the main menu allows you to set the Timeout
Value before the OS automatically boots. Use the Set Timeout Value option to set the
time, in seconds, to boot the default OS. If a value of zero- (0) is specified, there is no
wait to boot the default OS. The following three- (3) choices are available to disable the
timeout variable:
1. Use the Delete/Disable Timeout menu option to delete the timeout variable.
2. Set the timeout value to be 65535 <0xFFFF>.
3. Press a key when the EFI is booting and the timeout count down is disabled.
The timeout value is saved when the Set Timeout Value menu option is selected. Refer
to Figure 33.
68

Figure 32. Auto Boot Time Delay

hp workstation i2000 owner's guide