Removing The Processor Board; Figure 42. Processor Power Harness; Figure 43. Processor Assembly - HP i2000 Owner's Manual

7.2

Removing the Processor Board

1. Locate and remove the processor Power Pod's power harness from the main
power supply (shown in Figure 43).
2. Locate and remove the two- (2) screws securing the processor assembly to the
system chassis and set aside for later reinstallation. Remove the processor
assembly from the system chassis by lifting as shown in Figure 44. Place the
entire assembly aside on an anti-static surface.
86

Figure 42. Processor Power Harness

Figure 43. Processor Assembly

hp workstation i2000 owner's guide
Processor
Assembly
Power Harness
Processor
Assembly
Screws