Pci; Agp; Video; Lan - HP i2000 Owner's Manual

2.3.1

PCI

The baseboard has two- (2) 64-bit, 66 MHz PCI buses and one- (1) 64-bit, 33 MHz PCI
bus.
The WXB (Wide eXpansion Bridge) PCI bus 1 provides PCI slots 1, 2, and S2.
The WXB (Wide eXpansion Bridge) PCI bus 2 provides PCI slots 3 and 4.
The PXB (PCI eXpansion Bridge) PCI bus 0 provides PCI slots 5, 6, and IFB.
The IFB controls communications to IDE, USB, and Super I/O.
/
NOTE
For continued EMC compliance of the system, use only those peripheral devices
having an external output connector (i.e., audio, video), which are marked as
FCC tested for home or office use (FCC Class B), and marked as Canada ICES-
003 Class B compliant. For European installations, these devices are required to
be CE marked with declaration of conformity to the EMC directives
(89/336/EEC).
2.3.2

AGP

The baseboard provides support for AGP Pro 110 (4x @ 66 MHz) for high-end graphics
capability.
2.4

Video

An nVIDIA Quadro2 Pro provides video on the hp workstation i2000.
2.5

LAN

The I/O board supports integrated 10/100 Mbps LAN support (using the Intel® 82559
Fast Ethernet controller). An RJ45 connector accessible via the rear I/O panel is
provided for this purpose.
2.6

SCSI Controller

The i2000 workstation includes one- (1) QLogic* 12160 based SCSI Host Bus Adapter
(HBA) capable of Ultra3 Low Voltage Differential (LVD) data and control transfers at 160
MB/s.
40
hp workstation i2000 owner's guide