E-PAC Channel
11. Reattach the side panel by placing the tabs of the sheet metal into the slots of the system
at the top. Then slide the side panel towards the front of the system. When properly in
place, the lock can be depressed into the system and secured.
12. Reattach the bezel by aligning the top of the bezel to the top of the system. Then by
aligning the interlock clips with their respective slots push the clips into the slots starting
with the top two down to the bottom clips.
13. Reattach all external devices such as the keyboard, mouse, video monitor and AC power
into their respective ports.
14.
The system is now ready to power on.
108
Figure 58. E-PAC Inserted over Memory Cards
Figure 59. E-PAC Installation
hp workstation i2000 owner's guide
Baseboard E-PAC
Center Tab