Removal Of The System Components; Removal Of The Power Harness; Figure 41. Peripheral Power Harness - HP i2000 Owner's Manual
Hp i2000: owners guide
Hide thumbs
Also See for i2000:
- Hardware installation (24 pages) ,
- Software installation (4 pages) ,
- Bios manual (2 pages)
Table of Contents
Advertisement
7.
Removal of the System Components
7.1
Removal of the Power Harness
1. Locate and then remove the peripheral power supply harness from the main
power supply (as shown in Figure 42) in order to gain better access to the
system boards.
2. Lay the harness aside.
/
NOTE
This step does not require the power harness to be disconnected from any
internal peripherals or to be completely removed from the system chassis.
Figure 41. Peripheral Power Harness
hp workstation i2000 owner's guide
Peripheral
Power
Harness
85
Advertisement
Table of Contents
