System Board; Removing The System Board - HP Elite Slice G2 Maintenance And Service Manual

System board

Removing the system board

NOTE: All system board spare part kits include replacement thermal material.
NOTE: System board appearance may vary.
To remove the system board:
1. Remove the access panel
2. Remove the memory modules
3. Remove the Base Module
4. Remove the WLAN module
5. Remove the fan sink
6. Remove the M.2 solid-state drive
7. Remove the processor
8. Position the computer with the memory sockets facing upward.
9. Disconnect the speaker cable from the system board.
10. Position the computer with the processor socket facing upward.
(Access panel on page
(Memory on page
(Base Module on page
(WLAN module on page
(Fan sink on page 37).
(M.2 PCIe solid state drive (SSD) on page
(Processor on page 40).
21).
22).
30).
32).
38).
System board 41