Captive
Screws
Figure 4-1
Removing the Processor Board
When changing the processor board configuration, you must remove it from
the chassis as described in the following procedure.
1 Stop any application programs, then shut down your system.
2 Turn the system off, and unplug the power cord.
3 Using a flat-tipped screwdriver, unscrew the captive screws that secure
the board computer in the chassis, as shown in Figure 4-1.
4 Use the ejector handles to eject the board, and pull the board computer as-
sembly out of the chassis.
Removing the Board Computer Assembly
Processor Options Installation
Removing the Processor Board
Captive
Screws
4-5