Stacker/Stapler And Integrated Punch Unit - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Stacker/stapler and integrated punch unit
Introduction
Stack and staple prints with the optional Staple Finisher-A1 and optional Booklet Finisher-
A1. You can also saddle stich and trim booklets with the optional Booklet Finisher-A1.
Punch holes in your prints with the optional Punch Unit BG1/BH1/BF1.
#
IMPORTANT
•
If you create a saddle stitched booklet using coated paper or inserted sheets for the
cover, the image printed on the page after the cover may stick to the back of the
cover or back of the inserted sheets, depending on the type of coated paper you
are using.
•
If you create a saddle stitched booklet or staple using coated paper or inserted
sheets for the cover, the copy sets may dirty the surface (toner streaks) of the cover
depending the type of coated paper you are using.
•
If you create a saddle stitched booklet using coated paper for the cover, cracks may
appear around the fold of the cover, depending on the type of coated paper you
are using.
•
If you staple multiple copy sets using coated paper for the cover, the staples of the
copy sets may dirty the surface of the cover of the copy sets that have already been
output, depending on the type of coated paper you are using.
#
NOTE
The name of the puncher unit may differ according to region.
Components and their functions (external view)
6
5
4
3
Booklet Finisher-A1 + Buffer Pass Unit-F1
[17] External view
Stacker/stapler and integrated punch unit
1
6
5
2
4
Staple Finisher-A1
Chapter 2 - Main parts
2
33
Advertisement
Table of Contents
