Clean the roller
Introduction
If dirt or streaks appear on printed output, clean the roller inside of the main unit.
#
NOTE
•
It takes approximately 20 seconds to clean the roller.
•
Roller cleaning cannot be performed during printing.
Clean the roller (main unit)
Touch 'System' -> 'Maintenance'.
1.
Press 'Start maintenance'.
2.
Touch 'Clean the clean roller (main unit)' and touch 'Start' .
3.
A wizard opens.
Touch 'Next'
4.
A status message displays.
Press 'Finish'.
5.
Touch 'Stop' to close the 'Maintenance tasks' menu.
6.
Chapter 11 - Maintenance and calibration
Clean the roller
353