Loading Paper; Load The Media Into The Integrated Paper Trays - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Loading paper

Load the media into the integrated paper trays

Introduction
This section describes how to load the media into the integrated paper trays.
When you load the media via the 'Load' button in the 'Schedule', the media is automat-
ically assigned to the correct tray.
When you load and assign the media via the 'Assign' button in the 'Trays' view, you must
assign the loaded media to the corresponding paper tray manually.
#
When loading paper, take care not to cut your hands on the edges of the paper.
#
IMPORTANT
• A screen asking you to load paper also appears if the selected paper tray is not
fully inserted into the printer. Make sure that the paper drawer is properly in place.
• Do not load the following types of paper into the paper drawers. Doing so may
cause a paper jam.
- Severely curled or wrinkled paper
- Envelopes
- Thin straw paper
- Heavy paper (more than 221 g/m
- Paper which has been printed on using a thermal transfer printer (Do not print
on the reverse side of this paper either.)
• Fan the stack of paper well before loading it, and align the edges of the paper stack
on a flat surface.
• Never place paper or any other items into the empty part of the drawer next to
the paper stack. Doing so may cause paper jams.
•
Fan the stack of paper well before loading it. Paper, such as thin paper, recycled
paper, prepunched paper, heavy paper, transparencies, and tab paper, should be
fanned particularly well before loading.
Load the media into the integrated paper trays
CAUTION
2
/ 59 lb bond)
Chapter 9 - Paper, toner, and staples 237