Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 106

Description of the print job settings
'Output' settings - 'Binding edge'
#
Setting
'Binding
edge'
Media
The tile is read-only.
You can change the required media for the job through the media button in the preview
pane on the right side. When more than one media type has been defined for a job, a
separate button for each media type is displayed.
106 Chapter 6 - Print jobs
Values Description
The automatically set value for this setting.
'Auto'
• The output has a vertical format (height > width).
• The binding edge is at the left-hand side.
• When you turn a sheet over the binding edge, the
'Portrait left'
image or text on the back of the sheet is in readable
form.
• The output has a vertical format (height > width).
• The binding edge of the print is at the top.
• When you turn a sheet over the binding edge the
'Portrait top'
image on the back side of the sheet is in readable
form. This means that every back of a 2-sided print
is upside down compared to the front.
• The output has a horizontal format (width >
height).
• The binding edge of the print is on the left side.
'Landscape
• When you turn a sheet over the binding edge, the
left'
text or image is in readable form.
• The output has a horizontal format (width >
height).
• The binding edge of the print is at the top.
'Landscape
• When you turn a sheet over the binding edge, the
top'
image on the back side of the sheet is in readable
form. This means that every back of a 2-sided print
is upside down compared to the front.