Canon imageRUNNER ADVANCE C9075S PRO Safety Instructions
Canon imageRUNNER ADVANCE C9075S PRO Safety Instructions

Canon imageRUNNER ADVANCE C9075S PRO Safety Instructions

Color digital multifunction imaging system
Hide thumbs Also See for imageRUNNER ADVANCE C9075S PRO:

Advertisement

-
Safety Instructions
Read this guide first.
ENG
Please read this guide before operating this product.

Advertisement

Table of Contents
loading

Summary of Contents for Canon imageRUNNER ADVANCE C9075S PRO

  • Page 1 Safety Instructions Read this guide first. Please read this guide before operating this product.
  • Page 2: Table Of Contents

    Contents Chapter 1 Preface...3 Read the Safety Instructions Chapter 2 How to use this manual...5 Symbols used in this Chapter 3 Legal Notices...7 Legal Notices...8 Chapter 4 Important safety instructions...13 Introduction...14 Installation...15 Power supply...17 Handling...18 Maintenance and Consumables...25 Other warnings...26 Chapter 5 Installation location and Introduction...28...
  • Page 3: Chapter 1 Preface

    Chapter 1 Preface...
  • Page 4: Read The Safety Instructions Thoroughly

    Read the Safety Instructions thoroughly Read the Safety Instructions thoroughly Thank you for purchasing the Canon imageRUNNER ADVANCE C9075S PRO/C9065S PRO. Please read the safety instructions in this manual thoroughly before operating the machine. After reading this manual, store it in a safe place for future reference.
  • Page 5: Chapter 2 How To Use This Manual

    Chapter 2 How to use this manual...
  • Page 6: Symbols Used In This Manual

    Symbols used in this manual Symbols used in this manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. Overview of the attention-getters Word WARNING CAUTION IMPORTANT NOTE Chapter 2 - How to use this manual Icon...
  • Page 7: Chapter 3 Legal Notices

    Chapter 3 Legal Notices...
  • Page 8: Legal Notices

    (if under warranty), or with whom you have a ser- vicing contract. If you are not sure who to contact, and have both purchased and are using the equipment in the U.S.A., please refer to the "SUPPORT" page on Canon U.S.A.'s Web Site (http://www.usa.canon.com).
  • Page 9 Use of controls, adjustments, or performance of procedures other than those specified in the manuals for this machine may result in hazardous radiation ex- posure. International ENERGY STAR Program Copyright Copyright 2011 by Canon Inc. All rights reserved. CAUTION Chapter 3 - Legal Notices Legal Notices...
  • Page 10 No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any infor- mation storage or retrieval system without the prior written permission of Canon Inc. Disclaimers The information in this document is subject to change without notice.
  • Page 11 • Paper money • Money orders • Certificates of Deposit • Postage stamps (cancelled or uncan- celled) • Identifying badges or Insignias • Selective service or draft papers • Checks or drafts issued by governmen- tal agencies • Motor vehicle licenses and certificates of title To avoid unauthorized use of the machine Unauthorized copies can be prevented by using the key switch unit to manage the opera-...
  • Page 12 Legal Notices Chapter 3 - Legal Notices...
  • Page 13: Important Safety Instructions

    Chapter 4 Important safety instruc- tions...
  • Page 14: Introduction

    Introduction Introduction Please read these "Important Safety Instructions" thoroughly before operating the machine. As these instructions are intended to prevent injury to the user or other persons or destruc- tion of property, always pay attention to these instructions. Also, since it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual.
  • Page 15: Installation

    Installation • Do not install the machine near alcohol, paint thinner, or other flammable substances. If flammable substances come into contact with electrical parts inside the machine, it may result in a fire or electrical shock. Do not place the following items on the machine. If these items come into contact with a high-voltage area inside the machine, it may result in a fire or electrical shock.
  • Page 16 Installation • Do not remove the machine's level- ing feet after the machine has been installed, as this may cause the ma- chine to fall or tip over, resulting in personal injury. Chapter 4 - Important safety instructions CAUTION...
  • Page 17: Power Supply

    Power supply • Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull on or excessively bend it, as this could cause elec- trical damage and result in a fire or electrical shock. •...
  • Page 18: Handling

    Handling Handling • Do not attempt to disassemble or modify the machine. There are high-tem- perature and high-voltage components inside the machine which may result in a fire or electrical shock. • If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF the main power switch, and disconnect the power cord from the power outlet.
  • Page 19 • Do not press down hard on the feeder when using the platen glass to make copies of thick books. Do- ing so may damage the platen glass and result in personal injury. • Do not touch the finisher while the machine is printing, as this may result in personal injury.
  • Page 20 Handling • The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety. •...
  • Page 21: Maintenance And Inspections

    Maintenance and inspections • When cleaning the machine, first turn OFF the main power switch, then disconnect the power cord. Failure to follow these steps may result in a fire or electrical shock. • Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed.
  • Page 22 Maintenance and inspections • Make sure that the power plug is firmly inserted into the power outlet after cleaning the machine. Do not use the machine while the connection is loose, as doing so may cause a fire. • Check the power cord and power plug regularly. If the following conditions occur, contact your local authorized dealer, as the condition may cause a fire: - There are burn marks on the power plug.
  • Page 23 • The fixing unit and its surroundings inside the machine may become hot during use. When removing jammed paper or when inspecting the inside of the machine, do not touch the fixing unit and its surroundings, as doing so may result in burns or electrical shock. •...
  • Page 24 Maintenance and inspections • When removing jammed paper or replacing the toner cartridge, take care not to allow the toner to come into contact with your hands or clothing, as this will dirty your hands or clothing. If they become dirty, wash them immedi- ately with cold water.
  • Page 25: Consumables

    Consumables • Do not burn or throw used toner cartridges into open flames, as this may cause toner remaining inside the cartridges to ignite, resulting in burns or a fire. • Do not store toner cartridges or copy paper in places exposed to open flames, as this may cause the toner or paper to ignite, resulting in burns or a fire.
  • Page 26: Other Warnings

    Other warnings Other warnings For cardiac pacemaker users: This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from the product and consult your doctor. Chapter 4 - Important safety instructions WARNING...
  • Page 27: Installation Location And Handling

    Chapter 5 Installation location and handling...
  • Page 28: Introduction

    Introduction Introduction This section describes precautions for installation location and handling. We recommend that you read this section prior to using this machine. Chapter 5 - Installation location and handling...
  • Page 29: Avoid Installing The Machine In The Following Locations

    Avoid installing the machine in the following locations • Avoid locations subject to temperature and humidity extremes, whether low or high. For example, avoid installing the machine near water faucets, hot water heaters, hu- midifiers, air conditioners, heaters, or stoves. •...
  • Page 30 Avoid installing the machine in the following locations • Avoid locations where a considerable amount of dust accumulates. • Avoid locations where ammonia gas is emitted. • Avoid locations near volatile or flammable materials, such as alcohol or paint thinner. •...
  • Page 31 • Avoid installing the machine near computers or other precision electronic equipment. Electrical interference and vibrations generated by the machine during printing can adversely affect the operation of such equipment. • Avoid installing the machine near televisions, radios, or similar electronic equipment.
  • Page 32: Select A Safe Power Supply

    Select a safe power supply Select a safe power supply • Connect the plugs of the imageRUNNER ADVANCE C9075S PRO/C9065S PRO to an outlet that is 208V 15A or greater. • Make sure that the power supply for the machine is safe, and has a steady voltage. •...
  • Page 33: Moving The Machine

    Moving the machine Moving the machine • If you intend to move the machine, even to a location on the same floor of your building, contact your local authorized dealer beforehand. Do not attempt to move the machine yourself. Chapter 5 - Installation location and handling...
  • Page 34: Handling Precautions

    Handling precautions Handling precautions • Do not attempt to disassemble or modify the machine. • Some parts inside the machine are subject to high voltages and temperatures. Take adequate precautions when inspecting the inside of the machine. Do not carry out any inspections that are not described in the manuals for this machine. •...
  • Page 35 ( side) (The shape of the power plug may differ depending on your location.) • Do not turn the main power switch OFF or open the front covers while the ma- chine is in operation. This may result in paper jams. •...
  • Page 36 Handling precautions • Paper that has just been output from the machine may be hot. Be careful when removing or aligning paper from the output tray. Touching paper right after it is output may result in low-temperature burns. Chapter 5 - Installation location and handling...
  • Page 37: Provide Adequate Installation Space

    Provide adequate installation space Provide enough space on each side of the machine for unrestricted operation. • The Booklet Finisher-A1, Paper Folding Unit-G1, Professional Puncher Integra- tion Unit-B1, Professional Puncher-C1, Document Insertion Unit-H1, Buffer Pass Unit-F1, Duplex Color Image Reader Unit-A1, and Multi-drawer Paper Deck-A1 are attached.
  • Page 38 Provide adequate installation space Chapter 5 - Installation location and handling...
  • Page 39: Inspection Of The Breaker

    Chapter 6 Inspection of the breaker...
  • Page 40: Introduction

    Introduction Introduction This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once or twice a month using the following procedure. IMPORTANT • Make sure that the main power is turned OFF, before inspecting the breaker. •...
  • Page 41: Checking The Breaker

    Checking the breaker Push the test button on the rear of the machine with the tip of a ballpoint pen, or a sim- ilar object. IMPORTANT • Briefly push the test button. NOTE • The breaker is located on the rear of the machine. Confirm that the breaker lever is switched to the OFF ("O"...
  • Page 42 Checking the breaker Switch the breaker lever to ON ("I" side). ( I side) ( side) Press the main power switch to the ON ("I" side) position. Fill in the check sheet, located on the next page, to document your periodic inspections of the breaker.
  • Page 43: Check Sheet For The Periodic Inspection Of The Breaker

    Check sheet for the periodic inspection of the breaker Copy this page for future use, and store it in a safe place near the machine to document your periodic inspections of the breaker. • How to Inspect the Breaker Periodically Follow the procedure described in “Periodic inspection of the breaker,”...
  • Page 44 Index Breaker Check Sheet Breaker ...43 Periodic Inspection ...43 Breaker Inspection Breaker Inspection ...41 consumables Warning and Caution ...25 Handling Warning and Caution ...18 Inspections Warning and Caution ...21 Installation Warning and Caution ...15 Installation Precautions Installation Precautions ...29 Installation Space Installation Space ...37 Maintenance...
  • Page 48 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands (See http://www.canon-europe.com/ for details on your regional dealer)

This manual is also suitable for:

Imagerunner advance c9065s pro

Table of Contents