Stop after
A job
#
NOTE
When you print streaming jobs
two times to stop the printer as soon as possible.
Stop the printer automatically
Automatic stop
When
•
The 'Check first set' setting in a
'Workflow profile' is 'On', and
•
The 'Check first set' setting is also en-
abled in the job.
The 'Confirm start of job' setting in a
'Workflow profile' is 'On'.
How to stop and continue printing manually
Press
button one time to stop when the current set is completed.
1.
Press
button two times to stop as soon as possible.
2.
To resume printing, press
3.
#
NOTE
To stop printing after a job, you must select a job in 'Jobs' -> 'Queues' -> 'Scheduled
jobs'. Then you must touch the 'Stop after job' button.
Press the but-
ton
'Stop after job'
#
in the dashboard.
Description
In 'Jobs' -> 'Queues' -> 'Scheduled jobs' you must
select the job after which the printer must stop.
Then touch the 'Stop after job'.
A horizontal, red and white stop bar indicates that
the stop-after-job function is active.
The printer stops when the selected job is complet-
ed.
You must touch the 'Resume' button to resume
printing.
or jobs that consist of 1 large set, you must press
Then
The printer stops each time the first set
of a print job is completed. You can check
the first set before you continue the print
job.
The printer stops each time at the start
of a new job. You must start each job
manually.
Stop the printer
Chapter 6 - Print jobs
127