#
NOTE
When loading paper, make sure that the height of the paper stack does not exceed
20 mm (13/16"). If the height of the paper stack exceeds 20 mm (13/16"), the edges
of the paper stack may become curled or creased, and poor print quality may result.
Place a magnet label indicating the new paper size onto the paper deck.
18.
Close the paper deck.
19.
The inside lifter automatically rises and prepares the paper deck for feeding.
#
When closing the paper deck, be careful not to get your fingers caught, as this
may result in personal injury.
•
Load the media into the bulk paper modules, on page 257
Adjust the media size for the bulk paper module
CAUTION
Chapter 9 - Paper, toner, and staples
271