Staple Finisher-F1 Pro/Booklet Finisher-F1 Pro/Puncher Unit-Bb1/Booklet Trimmer-D1; Replacing The Staple Cartridge In The Stapler Unit; Staple Finisher-F1 Pro/Booklet Finisher-F1 Pro/Puncher Unit-Bb1/Booklet Trimmer-D1 (Optional) - Canon imageRUNNER ADVANCE 8085 Maintenance Manual

Staple Finisher-F1 PRO/Booklet Finisher-F1 PRO/Puncher
Unit-BB1/Booklet Trimmer-D1 (Optional)
This section describes the procedure for replacing the staple cartridge in the Staple Finisher-F1 PRO or Booklet Finisher-F1 PRO,
and removing the punch waste from the Puncher Unit-BB1.
For more information on the Booklet Trimmer-D1, consult the instruction manual that come with the optional product.

Replacing the Staple Cartridge in the Stapler Unit

When the Staple Finisher-F1 PRO or Booklet Finisher-F1 PRO is out of staples, and the staple cartridge in the stapler unit must be
replaced, a screen similar to the one shown below appears on the touch panel display. Follow the procedure described below to
replace the staple cartridge.
Use only staple cartridges intended for use in this machine.
Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to replace a staple
cartridge, discard the punch waste, or clear paper or staple jams, prints may still be output if other optional units are operating normally, and
are not involved in the paper or staple jam removal procedure.
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.

Staple Finisher-F1 PRO/Booklet Finisher-F1 PRO/Puncher Unit-BB1/Booklet Trimmer-D1 (Optional)

1
1-29