Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 42

Stacker/stapler and integrated punch unit
Puncher Unit-BG1 (2 holes)
4 1/4"
(108 mm)
#
IMPORTANT
You cannot punch holes into the following paper types.
•
Heavy 4 (257 to 300 g/m
•
1-sided coated 4 (257 to 300 g/m
•
2-sided coated 4 (257 to 300 g/m
•
Textured 4 (257 to 300 g/m
• Tracing paper, transparencies, prepunched paper, labels, or envelopes
#
NOTE
Punching is available only if Puncher Unit-BG1/BH1/BF1 is attached.
• When Puncher Unit-BG1 is attached, holes can be punched into the following
paper sizes.
- Two holes: A3, A4, and A4R
- Four holes: A3 and A4
• When Puncher Unit-BH1 is attached, you can punch holes into the following
paper sizes.
- Four holes: A3, A4, and A4R
• When Puncher Unit-BF1 is attached, you can punch holes into the following paper
sizes.
- A3 and A4
- 11" × 17", LGL, LTR, LTRR, and EXEC
Saddle folding
Saddle folding allows you to fold multiple sheets in 2 folds.
42 Chapter 2 - Main parts
80 mm 80 mm 80 mm 80 mm
Puncher Unit-BG1 (4 holes)
4 1/4"
(108 mm)
Puncher Unit-BF1
2
2 3/4"
(70 mm)
/ 100 lb cover to 110 lb cover)
2
/ 100 lb cover to 110 lb cover)
2
/ 100 lb cover to 110 lb cover)
2
/ 100 lb cover to 110 lb cover )
21 mm 70 mm 21 mm
Puncher Unit-BH1