Select More Than One Job For Printing - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Select more than one job for printing

Introduction
The table below describes the possibilities to select more than one job for printing.
Select more jobs
Options
Select 2 or more jobs
manually
'Select' button - 'All'
'Select' button - 'Jobs
with available media'
'Select' button - 'Jobs
with label'
How to select more than one job for printing
Touch 'Jobs' -> 'Queues'.
1.
If collapsed, first touch
2.
Touch the jobs you want to print one by one, or make a selection using the 'Select' button.
3.
The selected jobs are highlighted.
Press 'Print'.
4.
#
Description
Touch the jobs you want to print one by one.
All jobs in the list of 'Waiting jobs' are printed. The order
in the list of 'Waiting jobs' determines the print order.
However, in the list of 'Scheduled jobs' you can give prior-
ity to a job.
All jobs for which the required media are currently available
in the paper trays, will be printed. This improves the pro-
ductivity, because you must not change the required media
during printing. You may only need to add more of the
currently available media types.
A label is a name or tag that helps you to identify certain
jobs on the operator panel. When a job is sent to the
printer, the person who submits the job can add a label to
that job. The label can be any name that helps to identify
certain jobs. A label is not connected to job settings. The
label can be defined in the printer driver, in a job ticket or
via an automated workflow. For example, the label 'Cus-
tomer XYZ' can be added to jobs. Then you can select and
print all the jobs for 'Customer XYZ' at once.
to expand the desired list of 'Waiting jobs'.
Select more than one job for printing
Chapter 6 - Print jobs 131