Clean the automatic document feeder (ADF)
Clean the automatic document feeder (ADF)
Introduction
If originals that have been fed through the feeder have streaks or appear dirty, clean the
feeder's scanning area.
#
IMPORTANT
•
Do not dampen the cloth too much, as this may damage the original or break the
machine.
•
If the document feed scanning area is dirty, documents may not be scanned
clearly, and the size of the document may not be detected correctly.
#
NOTE
This procedure is necessary only if Duplex Color Image Reader Unit-A1 is attached.
Clean the ADF
Open the feeder.
1.
348
Chapter 11 - Maintenance and calibration