Adjust The Integrated Paper Tray To Hold A Different Paper Size - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Adjust the integrated paper tray to hold a different paper
size.
Introduction
If you want to load a different paper size into a paper drawer, follow the procedure de-
scribed below to adjust the paper drawer guides.
#
IMPORTANT
Only A4/LTR transparencies can be used. Make sure that the left guide is set to
A4/LTR when loading transparencies into a paper drawer. If transparencies of a dif-
ferent size (other than A4/LTR) are loaded into a paper drawer, the paper size and
remaining amount of paper is not correctly detected.
Adjusting the paper tray to hold a different paper size
Press and release the button on the paper drawer that you want to adjust. Grip the handle,
1.
then pull out the paper drawer until it stops. Remove all of the remaining paper.
Slide the left guide to align it with the mark for the desired paper size.
2.
Slide the guide until it clicks into place.

Adjust the integrated paper tray to hold a different paper size.

Chapter 9 - Paper, toner, and staples
Left Guide
243