Change The Print Delivery Settings - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Change the print delivery settings

Change the print delivery settings
Introduction
Usually the print delivery settings have been defined in the printer driver.
Overview of the print delivery settings
#
Setting
'Output location'
'Sort'
'Offset stacking'
'Advanced settings'
166 Chapter 6 - Print jobs
Description
Change the output location for the job. The list shows all
the output locations that are available for your system.
Make sure there is a match between the selected output
location and the job requirements. For example, when a
job requires staples, you must select an output location that
allows stapling.
Change the sorting method of the prints. You can select
sort 'By page' or 'By set'.
[231] Sort by page
[232] Sort by set
Stack the prints with an offset.
This setting is only available when the 'Offset stacking'
setting of the active 'Workflow profile' is set to 'Sets (as in
job)'.
Finishing equipment often requires that the printed sheets
are delivered in a certain order. For finishers that are inte-
grated in your printing system, the required settings are
adapted automatically. However, sometimes it can be nec-
essary to change a number of settings manually, for example
when you want to finish the prints using offline finishers.
If required, you can change the 'Sheet order', 'Sheet orien-
tation', 'Print order' and 'Rotation'.