Replacing The Staple Cartridge (For Optional Products); Replacing The Staple Cartridge In The Stapler Unit (Staple Finisher-G1/Booklet Finisher-G1) - Canon imageRUNNER Advance 4251 Basic Operation Gude

Replacing the Staple Cartridge
(For Optional Products)
When the fi nisher is almost out of staples and the cartridge in the stapler unit must be replaced, a screen prompting you to
replace the staple cartridge appears on the touch panel display. Follow the procedure described below to replace the staple
cartridge.
• The Staple Finisher-G1, Booklet Finisher-G1, and Inner Finisher-D1 are optional products.
• We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.
Replacing the Staple Cartridge in the Stapler Unit
(Staple Finisher-G1/Booklet Finisher-G1)
Remove the orange seal that holds the staples together after you place the staple cartridge into the staple case.
Use only staple cartridges intended for use with this machine.
Open the front cover of the fi nisher.
1
*1 Booklet Finisher-G1
*2 Staple Finisher-G1
80
*1 *2