Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 261
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
#
NOTE
•
Load the paper stack in stages, adding approximately 600 sheets of paper (64 g/m²
/ 17 lb bond) or 550 sheets of paper (80 g/m² / 20 lb bond) at a time. If the paper
deck can accommodate more paper, the lifter will descend.
•
Hot air blown by the fan may warm the inner size change plate of POD Deck
Lite-A1.
•
If there are instructions on the package of paper about which side of the paper to
load, follow those instructions.
•
When paper is loaded into the paper deck, the side facing up is the one printed
on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper
stack over, and reload it. However, you cannot turn textured or 1-sided coated
paper over. Change this paper instead.
Lower the feeding support roller.
5.
If Paper Deck Unit-A1 is attached, proceed to step 6.
Gently push the paper tray back into the printer until it clicks into place in the closed
6.
position.
The inside lifter automatically rises and prepares the paper deck for feeding.
Load the media into the bulk paper modules
Chapter 9 - Paper, toner, and staples
261
Advertisement
Table of Contents
