Removing The Stapler Unit - Canon Inner Finisher-H1 Service Manual

[2]
15. Remove the Front Plate [1].
• 2 Screws [2]
2x
16. Remove the Rear Plate [1].
• 2 Screws [2]
2x
17. Remove the Processing Tray Unit [1].
• 1 Screw [2]
[1]
[1]
[2]
[1]
[2]
4. Parts Replacement and Cleaning
1x
[2]
NOTE:
For ease of disassembly, remove the rear side first and
then keep front side down to remove this machine.

Removing the Stapler Unit

■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 41
2. Remove the Front Cover
Cover Unit" on page 55
■ Procedure
1. Remove the Stapler Unit [1] at the Stapler Mount.
• 1 Screw [2]
NOTE:
In the diagrams, number [3] is the spare screw hole.
2. Remove the Cable Cover [1].
• 2 Claws [2]
64
[1]
Unit."Removing the Front
1x
[3]
[2]
[1]