Feeding originals into the ADF
Place your originals as far into the feeder as they will go, until the Original Set indicator
is lit.
[302] Original Set indicator (1)
#
IMPORTANT
•
Do not add or remove originals while they are being scanned.
•
When scanning is complete, remove the originals from the original output area
to avoid paper jams.
[303] Original output area (1)
#
NOTE
•
When enlarging an A4/B5/LTR/STMT original onto A3/B4/11" X 17"/LGL
paper, place the original horizontally.
•
The scanned originals are output to the original output area in the order they are
fed into the feeder.
196
Chapter 7 - Copy jobs
1
1