Perform the '2. Auto gradation adjustment' procedure separately
Touch 'System' -> 'Color management'.
1.
Press '2. Auto gradation adjustment'.
2.
Touch one of the following options.
3.
•
'Full adjustment' (recommended)
•
'Quick adjustment'
From the 'Calibration method' window, select 'Automatic (internal sensor)' and touch
4.
'OK'.
An instruction window opens.
Wait a few minutes while the printer performs the '2. Auto gradation adjustment'.
Remove the test prints.
5.
Press 'OK'.
6.
Press 'Finish'.
7.
•
Calibrate the printer - 1. Shading correction , on page 362
•
Calibrate the controller - 3. Media family calibration , on page 366
Calibrate the printer - '2. Auto gradation adjustment'
Chapter 11 - Maintenance and calibration
365