Remove The Punch Waste Of The Punch Unit - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Remove the punch waste of the punch unit
Introduction
This section describes how to remove the punch waste.
#
IMPORTANT
•
Take care when handling the optional equipment that is attached to the machine.
When an optional unit's cover is opened to replace a staple cartridge, discard the
punch waste, discard the trim waste, or clear paper or staple jams, prints may still
be output if other optional units are operating normally and are not involved in
the paper or staple jam removal procedure.
•
When the punch waste tray is full, you cannot use the punching options.
#
NOTE
This procedure is necessary only if Puncher Unit-BG1/BH1/BF1 is attached.
Remove the punch waste of the punch unit
Open the front cover of the finisher.
1.
Remove the punch waste of the punch unit
Chapter 9 - Paper, toner, and staples
293
Advertisement
Table of Contents
