#
NOTE
Instead of 12.34.56.78 you must enter the host name or IP address of the PRISMAsync
controller. Booklet is the name you gave to the hotfolder when you created the auto-
mated workflow.
Click 'Finish'.
5.
A log in screen will appear.
Enter the user name and the password that were defined when the hotfolder function
6.
was enabled in the Settings Editor.
Click 'OK.'
7.
The hotfolder is now ready for use.
If desired, you can create a shortcut to the shared network folder on the desktop of the
8.
workstation.
Create a shared network folder on a workstation
Chapter 10 - Adapt printer settings to your needs
341