Cleaning The Inside Of The Machine (Bottom Plate Cleaning) - Canon PIXMA G2160 Online Manual

Table of Contents

Advertisement

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper may
get dirty, so we recommend performing cleaning regularly.
You need to prepare: a single sheet of A4 or Letter-sized plain paper*
* Be sure to use a new piece of paper.
1. Make sure that the power is turned on and remove any paper from the rear tray.
2. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper.
3. Load only this sheet of paper in the rear tray with the open side facing you.
4. Pull out the paper output tray, then open the output tray extension.
5. Hold down the Stop button until the Alarm lamp flashes twelve times, then release it
immediately.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning
again.
Note
• When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.
If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be
stained. Wipe off any ink from the protrusions using a cotton swab or the like.
Important
• Be sure to turn off the power and unplug the power cord before cleaning the machine.
84

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma g2000 series

Table of Contents