MacDon M155 Unloading And Assembly Instructions page 55

g. Rotate Operator's seat to engine-forward mode.
h. Switch ROAD lights ON, and check that all lights
are functioning as shown below.
TURN SIGNALS / HAZARDS - AMBER
TAIL / BRAKE LIGHTS - RED
REAR: ENGINE-FORWARD
TURN SIGNALS / HAZARDS - AMBER
HIGH / LOW - ROAD
FRONT: ENGINE-FORWARD
i. Activate HIGH/LOW switch, and check lights.
j. Activate turn signals and hazard warning lights
with switches on CDM, and check lights.
Form 169540
PRE-DELIVERY CHECKS
VIII.
a. Turn ignition ON, and activate beacon switch.
b. Check beacons are working.
IX.
55
BEACON (If Installed)
BEACON LIGHTS - AMBER
HORN
Push HORN button, and listen for horn.
Revision B