MacDon M155 Unloading And Assembly Instructions page 5


Stop engine, and remove key from ignition
before leaving Operator's seat for any reason.
A child or even a pet could engage an idling
machine.

Keep the area used for servicing machinery
clean and dry. Wet or oily floors are slippery.
Wet spots can be dangerous when working
with electrical equipment. Be sure all electrical
outlets and tools are properly grounded.

Use adequate light for the job at hand.

Keep machinery clean. Do not allow oil or
grease to accumulate on service platforms,
ladders or controls. Clean machines before
storage.

Never use gasoline, naphtha or any volatile
material for cleaning
materials may be toxic and/or flammable.

When storing machinery, cover sharp or
extending components to prevent injury from
accidental contact.
Form 169540
SAFETY
purposes. These
5
Revision B