MacDon M155 Unloading And Assembly Instructions page 54

VII. EXTERIOR LIGHTS
a. Ensure Operator's seat is locked in cab-forward
mode.
b. Switch FIELD lights ON, and check that all lights
are functioning as shown below.
FIELD LIGHTS
HIGH / LOW
- ROAD
FRONT: CAB-FORWARD
FIELD LIGHTS
SWATH LIGHTS - HIGH / LOW
REAR: CAB-FORWARD
Form 169540
PRE-DELIVERY CHECKS
c. Switch ROAD lights ON, and check that all lights
d. Activate HIGH/LOW switch, and check lights.
e. Activate turn signals and hazard warning lights
f.
54
are functioning as shown below.
HIGH / LOW - ROAD
TURN SIGNALS / HAZARDS - AMBER
FRONT: CAB-FORWARD
TURN SIGNALS / HAZARDS - AMBER
TAIL LIGHTS - RED
(If Installed)
SMV SIGN
REAR: CAB-FORWARD
with switches on CDM, and check lights.
Turn lights OFF.
(continued next page)
Revision B