Table of Contents
Advertisement
LCD-80F Annunciator
1.2
Components & Wiring
Figure 1-1:
OFF = Key-switch Enabled
J2
Piezo Sounder
The LCD-80F sounder, if enabled, will be
activated when any new alarm or trouble is
received from the panel. It is silenced by an
Acknowledge switch. Piezo must not be
disabled without approval of the LAHJ
(Local Authority Having Jurisdiction).
8
Components
ON = Piezo Enable
OFF = Receive only
Panel Configuration
Future use
Document 51338 Rev. B 08/24/05 P/N 51338:B
Components & Wiring
SW 1
Membrane Connector
Cable connection to membrane switches
for Acknowledge, Silence, Drill and
Reset.
Note: See "DIP
Switch Settings
Example" on
page 13.
Top view
J3
J1
Advertisement
Table of Contents
