Event Log - Honeywell ESSER Fire Alarm Control Panel Compact Commissioning Instruction

Fire Alarm Control Panel Compact
4.1

Event log

Display of the event log
The event log can be displayed at access level 3. The last 10,000 events, such as alarm, fault, switch-off,
keyboard enable, are stored in the event log in chronological order. The last event is always displayed first.
The events are automatically assigned with a message serial number. A higher number therefore means a later
event (i.e. serial number 001 = oldest event).
service
1 event log
2 battery information
3 earth fault information
4 configuration
5 access level 4
- maintenance mode
Fig. 12: >Service< menu screen
event log
1 Show :
2 Time : off
3 Object : All
4 Event : 5/5
3
Fig. 13: >event log< menu screen
The event log can be searched for specific events with the cursor keys.
eventlog
event no. : 01360
time : 09:58:06
event : access level 3 com.
object : panel
label 1 :
label 2 :
add. info :
Fig. 14: Event log menu and cursor keys
Fig. 15: Cursor keys
12
3
The event display can be filtered by 'Time', 'Object' and 'Event'
here.
3
<-01360-> 01360
19.06.2012
3
 Next 10 events (+10)
 Next event (+1)
 Previous 10 events (-10)
 Previous event (-1)

Select >Event log< menu item.
1
 Confirm selection/entry shown in the display
FB 798238.GB0 / 10.14