Section 2: System Overview; System Description; 1: Standard Features; 2: Options - Honeywell XLS140 Installation Manual

2.1 System Description

The XLS140 and XLS140E control panels are modular, intelligent fire alarm control panels
(FACPs) with an extensive list of powerful features. The control panel integrates a central
processing unit (CPU), a 6 amp power supply, and a battery charger. This is combined with a
mounting chassis and cabinet to create a complete fire alarm control system. The panel supports
FlashScan® protocol and has network capabilities. A single SLC loop is supported with the basic
equipment package; a second SLC loop can be added by attaching an optional loop expander
module (LEM-320).
Modular devices mount to the chassis to provide additional output circuits, including voice and
telephone modules to form a complete voice evacuation system. Five cabinet options for enclosing
system components are available.
The control panel has the capacity for installing up to 636 addressable points; 159 detectors and
159 monitor/control modules per SLC (Signaling Line Circuit).
2.1.1 Standard Features
• Uses early warning fire detection and the FlashScan® or Classic Loop Interface Protocol
(CLIP) families of detectors and modules
• Four standard Notification Appliance Circuits (NAC), Class A or B
• Alarm, Trouble, Supervisory and Security relays
• Support for 32 annunciator addresses, with 10 special annunciator groups
• Supports Style 4, Style 6, Style 7 SLC loops
• Connections to easily mount an expander board to add a second SLC loop
• Releasing service using on-board NACs or XLS-CM-N/XLS-CM-N/TC810N1013 modules
• Logic Equations
• Display scroll selection
• Alarm verification supervisory indication (NYC)
• Supervisory duct detectors
• Supports Advanced Warning Addressable Combustion Sensing (AWACS) algorithms
• Network operation
• Battery charger supports 12-55 amp hour sealed lead-acid batteries
• EIA-485 connections for wiring ACS annunciators (including LDM custom graphic
annunciators), TM-4 transmitter
• EIA-232 connections for printer, CRT, printer/CRT, or network operation
• Autoprogram feature for faster programming of new devices
• The control panel provides 6.0 amps of usable output power in an alarm condition; it provides
3.0 amps of usable output power in normal or continuous operating conditions
• Diagnostic LEDs and switches
• Ground fault detection
• Battery and battery-charger supervision, voltage-monitoring, and current-monitoring
• Panel circuit modules support up to 64 circuits
• Programmable for strobe synchronization
2.1.2 Options
Refer to Section 2.2 "System Components" for descriptions of the various optional modules.
XLS140 Installation Manual Form Number 95-7673-3 P/N 51927:C 12/06/2005

Section 2: System Overview

13