Table of Contents
Advertisement
5_Daily use
5_1 Card reading
Insert the card manually in the reader,
magnetic stripe facing the main body of
the terminal, and slide the card from the
rear to the front in a continuous motion for
best results.
When sliding the card through the reader,
make sure that the magnetic stripe on the
card is facing the Lane/5000 display screen
(see Swiping a Magnetic Stripe Card).
Swipe the card with constant speed, neither too slowly nor
too fast, to maximize the reading efficiency
Chip cards should be inserted into your
terminal as illustrated with the chip facing
up and into the card reader.
Bring the card to the active zone above the
contactless logo (at about 1cm).
Keep the card close to the contactless logo
during the transaction.
Lane/5000
900021971 R11 000 05/0917
5_1_1 Swiping a card
5_1_2 Inserting a smart card
5_1_3 Reading a contactless card
Copyright© 2017 Ingenico
20
All rights reserved
Hide quick links:
Advertisement
Table of Contents
