Barcode Reader; Card Insertion; Swiping A Card - Ingenico iSMP-Companion User Manual

5.3.

Barcode reader

Barcode is activated with the 2 side keys as shown below.
List of bar codes supported:
Reader type
1D
2D
5.4.

Card insertion

5.4.1.

Swiping a card

•
Insert the card manually in the driver, magstripe-facing right.
Swipe the card with constant speed, not too slow not too fast, to maximize the
reading and avoid annoying repetitions.
•
iSMP-Companion
90000 R11 000 04/1120
CMOS Imaging reader
Reads 1D and 2D codes
1D: Codabar, Code 3 of 9, Code 11, Code 32 Pharmaceutical
(PARAF), Code 93, Code 128, EAN with Add-On and EAN with
Extended Coupon Code, EAN-13, Interleaved 2 or 5, Matrix 2
of 5, Plessey, GS1DataBar, Straight 2 of 5 IATA, Straight 2 of 5
Industrial, Telepen, Trioptic Code, UCC/EAN-128, UPC and
UPC-A
2D: MicroPDF, Codeblock, Aztec, QRCode, MaxiCode,
DataMatrix, PDF417
18/24
Copyright © 2012 Ingenico
All rights reserved